Getting the most from a single source.
Garage Exhaust / Indoor Fume Control

2 Ply Silicone/Fiberglass Hose

Part Number: 3MBSFX2
2 ply reinforced silicone fiberglass exhaust extraction duct. This premium duct is constructed of 2 ply woven fiberglass coated with silicone rubber. The inner and cover plies are high temperature bonded and wire encapsulated to provide maximum flexibility and serviceability.


Medium pressure hot air-handling

Handling of combustion by-products

Economical style for stationary or low movement exhaust control

Product code: 3MBSFX
Material: Silicone coated fiberglass - 2 plies
Construction: Molecular bonded, wire encapsulated
Diameters: 2" to 24" I.D.
Weight: 6" ID = .9 lbs/ft
Standard Length: 25 ft.
Compression Ratio: 2:1
Temperature range:-60°F to +500°F (+600°F intermittent)
Colour: Orange/Red

*available with and without external wearstrip
Not recommended for hose reels - see MB-SN Silicone Nomex® Style

2 Ply Silicone/Fiberglass Hose
2 Ply Silicone/Fiberglass Hose
Home| Company| Quotes| Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2023, Novaflex. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

Website Design and Development By Red Leaf Development