Novaflex
Getting the most from a single source.
Ultra High Temperature

U-Lok 1000

Part Number: 3UL1000
A highly flexible duct made of a fine wire reinforced (E-Glass ceramic cloth) that is chemically treated and coated. Ideal for higher temperature fume recovery.

Applications
High temperature fume recovery
Scuff resistant
Flame resistant
*Air Velocity should be less than 50 m/sec.
A negative pressure fan system with ambient air inlet is recommended to maximize effectiveness and life of duct. It is important to size the duct diameter according to the exhaust output


Construction:
Product code: 3UL1000
Material: Alumina coated, textile glass, fabric reinforced with a fine V4A wire.
Construction: Mechanical bond, galvanized steel helix (also available stainless steel helix).
Diameters: 3” to 24” I.D. Larger sizes available.
Weight: 6” I.D. =1.01 lbs/ft.
Length: 25 ft.
Compression Ratio: 3”-4”= 4:1
Temperature range -5°F to +1000°F. Intermittent.
Colour: Metallic Grey

The life of all fabric ducts can be greatly extended when sized correctly according to equipment exhaust requirements. When exhaust fume leakage is of a concern a negative pressure fan system should be incorporated. Please consult a Novaflex factory salesperson for correct sizing for diesel, caustic or high velocity exhaust applications. This will aid in reducing exhaust temperatures and static pressures. Diesel exhaust particulate can cause abrasion in exhaust applications. The amount of particulate expelled in diesel exhaust can effect the useful service life. Where exhaust fume leakage is of concern a negative pressure fan system should be incorporated.
U-Lok 1000
U-Lok 1000
Home| Company| Quotes| Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Novaflex. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

Website Design and Development By Red Leaf Development