Novaflex
Getting the most from a single source.
GasTec Marine Loading Arm

GasTec Marine Loading Arm

Part Number: MLA3

The GasTec is specifically designed to unload Compressed Natural Gas under high pressure.

Suitable for operation pressures up to 100 bar at temperatures between -50 and +200°C with diameters from 6" up to 12"

Key Features

  • Cable free design with adjustable balancing link
  • Fully hardened replaceable cartridge swivel ball races
  • Support jack bent towards ship manifold
  • Provided with pressure relieve system
  • Vacuum resistant block seals
  • Hydraulic operation
  • Supported design with single product pipe
  • Only six swivel joints required with minimal jetty loads.
  • Minimum pressure drop
  • Zero emission
  • 10 years guarantee
Technical Details 
  • Hydraulically operated
  • Dedicated hydraulic solenoid valves for each Marine Loading Arm
  • Completely balanced, in empty or full condition
  • 6" up to 20"
  • -50°C / + 200°C
  • Suitable for all (petro-) chemicals, liquids and gases.
  • up to 900#
  • Available in all materials, e.g.: Carbon Steel, Stainless Steel and Stainless Steel 316Ti

Contact Us


GasTec Marine Loading Arm
GasTec Marine Loading Arm
Home| Company| Quotes| Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, Novaflex. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

Website Design and Development By Red Leaf Development